As the main engineering construction. Case excavator provides an efficient construction method for earthwork. As the saying goes: “A handy tool makes a handyman.” For machinery owners, equipping the Case excavator with suitable bucket parts according to environments is sensible. If you want to save time, Purchasing Case excavator parts online would be a good way. What are the types of buckets? Next, we will show you in detail.

1. Case Excavator Components Earthwork Bucket

The earthwork bucket is a kind of common Case excavator spare parts. Basically, it is the standard collocation of small and medium-sized excavator. Generally, earthwork buckets are suitable for the application of clay mining and sand, soil, gravel and other operating environments with soft materials.

Earthwork buckets have a large capacity. That means the filling coefficient and working efficiency are correspondingly high. But, because there is no reinforcement design, the earthwork buckets are easy to wear.

2. Rock Bucket

The shape of the rock bucket is similar to that of the earth bucket. But it adopts the design of installing of thickening plates. The bucket teeth, bucket wings, both sides of the bucket teeth and the bottom of it are very solid.

komatsu excavator aftermarket parts

The unique protection and reinforcement of the rock bucket make it have strong anti-wear, pressure resistance. Rock bucket is suitable for heavy working environments, such as stone, secondary hard rock, weathered rock, hard rock, mining of ore after blasting and other bad conditions.

3. Loose Soil Bucket

Loose soil bucket, as the name implies, it is a construction part to loose soil. The bucket has single and multi-tooth. Case parts makers tend to install high-strength wear-resistant steel plates on them to reduce the wear of accessories and increase the Excavator parts service life. Loose soil bucket has a broad range of applications in crushing, digging and loading of hard soil, secondary hard rock, and aeolian fossil. It is worth noting, the pros of this kind of bucket are sharp, easy to break the earth. The cons are its capacity is relatively small.

4. Case Excavator Parts Grab Bucket

Commonly, there are two kinds of Grab: shell grab an orange flap grab. As the name indicates, a shell clamp bucket looks like a shell. The claw grab consists of three or more jaws, similar to a peeled orange.

The working principle of the grab bucket is driven by a hydraulic cylinder, driving the bucket teeth to complete the opening and closing action to grab materials. The grab bucket is suitable for excavation of foundation pit, deep pit and loading of loose materials such as coral sand, gravel, soil, etc., especially in some environments with limited space. The grab also has the ability to dig and load sideways. Nevertheless, because of weak digging power, this kind of Case excavator parts are not suitable for hard ground and can only grab loose materials.

5. Four in One Bucket

Four in one bucket looks a lot more complicated and can be used to achieve loading, scraping, clamping and other operations. With the help of a hydraulic oil cylinder, four in one bucket can discharge materials automatically without running the machinery, which is convenient and quick.

Normally, the four in one bucket is not suitable for heavy operations such as trenching and trenching. Moreover, it has many functions and components, which require more maintenance.

Mentioned above, there so many kinds of buckets, each bucket has its own features and working conditions. Only by selecting appropriate accessories according to the construction needs, can we achieve twice the result with half the effort. Got an opinion on something within this article? Just let us know by leaving a comment.

Read more: 4 Steps Help You Know Bucket Teeth Quickly